With the Virtual Reality/Artificial Reality Electromagnetic Motion Tracking system, Premo offers a basis with which engineers can easily build a demo system in order to build demonstrations quickly. The VR Demo Kit Gen2 consists of a single 3D magnetic field source and three separate wireless battery powered sensors. Each sensor has a 3D magnetic…
Exodus Communication introduces a robust and modern version for high power traveling wave tube, electron tube based amplifiers. The AMP2065E-LC from Exodus Advanced Communications is a solid-state power amplifier in the frequency range from 6 to 18 GHz. With 600W of power, it offers more 57dB of amplification This Class A/AB linear amplifier has spurious…
The IG-Oven is a series of shielded test housings, specially built for RF / EMC testing of electronics in climate ovens. Therefore these are suitable for working under extreme conditions. The IG-Oven series is standard available in different versions, so that they fit in almost every climate cabinet. The materials used in the IG-Oven can…
Reliably shield equipment against EMI, which can be done at the component level or by shielding the housing itself. In particular, if it appears that there is too much interference during an EMI test, it is desirable to resolve the interference immediately and on site. Leader Tech has a universal solution for this with their…
Combi-Shield from PSC is a display solution that provides EMI shielding, while preserving the touchscreen function. The retrofit mesh front panel consists of a chemically blackened grid of only 1-1.5mm thick, with an electrically conductive metal edge of at least 12mm wide. So it is not embedded in a glass or polycarbonate support plate. The…
EMC shielding in electronic products can be expensive and take up a lot of space on the printed circuit board. This is particularly the case for products that are produced in high volumes, such as smartphones, IOT sensors and automotive electronics. But this also applies to sensitive radar systems and specialist equipment in aerospace. This…
The AK-521F-7 broadband antenna kit from AH systems is a handy, portable, broadband applicable antenna kit for both immunity measurement and radiation measurements. The whole is packed in a robust case for measurements in the field. This kit allows testing according to FCC, MIL-STD, VDE, TEMPEST and Immunity. The kit consists of a broadband antenna,…
Ranatec offers Digital Step Attenuator modules and systems that cover all mobile frequency bands and have a calibrated attenuation range. The Ranatec RI 4410 is a 4-bit attenuator with a working range from 50 MHz to 6 GHz and offers attenuation up to 95.25 dB with a step size of 0.25 dB. This attenuator can…
